Image default

The Top 5 Rules Of Safe Concrete Cutting

A good concrete cutter will not only do a good job but do it safely. Concrete cutting has its own risks and dangers.

Concrete cutting and sawing involve the use of powerful cutting machines and other tools. 

That’s why it’s important to follow the safety rules to protect yourself as well as the property when cutting concrete.

This article provides information on the top 5 rules for safe concrete cutting.

  1. Wear Protective Gear
  2. Deal With Interruptions
  3. Monitor The Saw Rotation
  4. Reduce Concrete Dust
  5. Ground All Your Electrical Equipment
  1. Wear Protective Gear

You should wear protective gear before getting involved in any type of concrete cutting project.

This rule should be followed by the cutter and any other person working in the area.

Goggles, gloves, earplugs, footwear with steel covering, and appropriate clothing are some of the protective gear you should wear before getting involved in any type of concrete cutting project.

Goggles are probably the single most important piece of protective gear as they help protect your eyes from flying particles while cutting concrete.

If you have to cut for an extended period, you should wear some type of respiratory protection to avoid any particles from being inhaled in the process.

Steel boots and gloves help prevent injuries to the hands and feet during the cutting process.

  1. Deal With Interruptions

There are times when you may have to temporarily stop the cutting and attend to some other task.

For example, you may get a call from someone while working on the concrete cutter.

When this happens, you should first turn off the concrete cutting tool and set it in a safe place. This is important to prevent any unwanted accidents.

There are many instances where people have been injured due to concrete cutting machines not being switched off properly.

  1. Monitor The Saw Rotation

You should pay close attention to the rotation angle of the concrete saw. Make sure the blade isn’t bending on an angle.

Go slow while operating the concrete saw blade. Trying to unnecessarily speed up the process can cause unwanted accidents.

If you have to use the concrete saw on a higher elevation, make sure to do it on a solid platform for the safety of yourself and others in the vicinity.

Planning is important to prevent on-site accidents when cutting concrete.

  1. Reduce Concrete Dust

Concrete dust contains silica which may lead to silicosis when inhaled.

It’s important to keep concrete dust in the air at a minimum to protect yourself and others who work on-site.

Use the wet cutting method to minimise the dust when cutting concrete.

The wet cutting method is highly effective in completing the cutting job with minimum dust being released during the cutting process.

The site should also have local exhaust ventilation (LEV) to reduce the dust when cutting concrete.

  1. Ground All Your Electrical Equipment

Electricity should be managed properly to prevent it from being a hazard.

All electrical equipment and tools should be grounded and insulated properly to safeguard workers and the premises.

If you are using a wet cutting method to cut concrete, you shouldn’t operate any electrical equipment or tool when doing so.

These are important things to consider to guarantee your safety as well as the safety of other employees on-site. You may also consider looking for a specialist concrete cutting company like Megasaw who uses only the best practices to get the job right.

Related posts

You Need to Hire Qualified Land Surveyors

Garrick Fabian

Time to Redo the Driveway? Concrete Is the Answer

Garrick Fabian

Check Out These Newest UK Family Attractions

Garrick Fabian